L-Dot Pico is a 15W, 1-4 channel DMX controlled constant current LED driver. It has a 350mA-700mA LED current range, offers 15-bit dimming, and its break-through form factor makes it ideally suited for in-fixture installation.
L Series
The L Series products are highly integrated, constant current
driver / controllers for high-brightness LED lighting applications,
targeted at in-fixture installation.
The L Series driver/controllers can be used in a network or as
standalone devices. ShowMaster, supported on all eldoLED
driver/controllers, allows you to upload show sequences for
use in standalone mode. Create and manage your own show
sequences using the TOOLbox and freely available PC software.
The L Series driver/controllers feature one LED current source
for up to 4 LED groups. They are DMX- and LedSync-compatible,
allowing 15-bit dimming and colour control and bidirectional
communication for driver configuration and temperature
read-out.
L-Dot Pico
The L-Dot Pico is the ideal choice for powering 350mA -
700mA, high-brightness LEDs and is available in a 1-, 2-, 3-
and 4-channel version.
Single current source, multiple LED colour groups
eldoLED technology drives up to 4 LED (colour) groups from
a single, high-precision LED current source, which not only
gives the L Series driver/controllers a power efficiency of up to
95% but has also resulted in a break-through form factor.
 (View larger image)
|
Example of an LED group wiring schematic
|
|
|
Small form factor:
in-fixture installation
The remarkably small size of the driver/
controller makes it ideally suited for in-fixture
installation, leading to less cabling,
increased design freedom and improved
system cost for luminaire manufacturers.
High control resolution
The L-Dot Pico supports a 15-bit control resolution per output
channel for accurate dimming and fine colour mixing.
Low EMI
Shorter LED wires due to in-fixture installation, slew-rate controlled
dimming, shielded conductors and the use of a single
LED current source all contribute to keeping the driver’s EMI
emissions at a very low level.
Robust thermal management
The L Series’ high efficiency results in less heat at the same
light output. This means you can have an equal light output
from a smaller package - the driver/controller can even share
the heat sink of the LED engine, lowering total system costs.
Furthermore, its NTC interface enables various ways of thermal
protection, including LED throttling, a graceful decrease of
light output until normal operating temperatures are reached.
Features
• USITT DMX512A- and
LedSync-compatible
• Break-through form factor:
25mm / 0.98” diameter
• Power output of up to 15W
• Operating supply voltage range:
12V - 28V DC
• Onboard interface for NTC thermistor
Advantages
• In-fixture installation
• Accurate, smooth dimming and
high-res colour mixing
• Power efficiency of up to 95%
• Drive, control and thermal protection
per fixture
• Easy network setup
• Low EMI
|
|
(View larger image)
Download datasheet
Download other documentation
FAQs
Does this product not completely meet your requirements, or is it over-specced? Click here to find out how you can have a standard product adapted to meet your specifications.
|
|
(View larger image)
