| |
Enclosed LED drivers (100-277VAC)
|
Enclosed LED drivers (12-32VDC)
|
|
In-fixture LED drivers
|
|
Lamp drivers
|
|
Modules
|
|
Accessories
|
|
DimWheel Colour
|
|
TOOLbox
|
|
Demo kits
|
|
Analog-to-DMX bridges
|
|
DALI-to-DMX bridge
|
|
 |
| |
|
| |
| DMX-compatible integrated network dimmer |
| |
|
|
|
|
|
DimWheel Series
The DimWheel is a powerful one-button DMX controller that
lets you set dim level, colour and show for LED drivers and
DMX compatible luminaires. It is easy-to-install and meets EU,
UK and US wall box size requirements. Also, it is compatible
with most dimmer face plates available on the market.
DimWheel Colour
The DimWheel Colour features the following operation modes:
• for general white LED lighting
applications, the 1-channel mode lets
you dim the light and turn it on or off.
• for applications requiring
colour temperature control, e.g. mixing
warm and cool white light, the
DimWheel features a 2-channel mode.
In this mode, you can set the colour
temperature, dim the light and turn it
on or off.
• for static and dynamic full colour
applications (RGB and RGBW/A),
the 3- and 4-channel modes offer
complete colour or show control plus
dimming and on/off control.
Colour control allows you to create
any hue and pick a saturation level for
this hue. Show control lets you run a
show in DMX broadcast or chase
mode and set the show speed.
Dimming and colour:
high control resolution
The DimWheel offers a large dynamic range from 100% down
to 0.5%. For most applications, it suffices to have an 8-bit
control resolution. In 8-bit DMX mode, DimWheel offers a
gamma-corrected dimming curve. The 16-bit resolution guarantees
extremely smooth brightness control and fine colour
mixing, making the DimWheel the perfect one-button digital
LED dimmer.
Shows: broadcast and chase
DimWheel Colour offers two types of show modes: broadcast
and chase. You can use broadcast mode for mood lighting
where all connected luminaires receive the same set point
(=colour) and use chase mode for linear dynamic applications.
You can define and upload show sequences to the DimWheel
Colour yourself by connecting the eldoLED TOOLbox to the
DimWheel’s LedSync-in interface and using the freely available
TOOLbox PC software.
|
|
Easy installation
The DimWheel fits into EU, UK and US industry-standard wall
boxes. The DimWheel’s mounting plate ensures easy installation
into the wall box, and its push-in connectors and strain reliefs
guarantee easy and tidy connection of wires.
Setup is a breeze!
The DIP switches, which are accessible after mounting, allow
you to set the operation mode, select the show mode (broadcast
or chase) and set the network resolution to 8- or 16-bit.
Features
• USITT DMX512A compatible
• One-button
on-off/dimming/colour/show control
• Operating supply voltage range:
12V-32V DC
• DIP switches for configuration,
accessible after mounting
• External switch interface allows
remote show selection
• All settings saved to memory when
light is switched off or when a power
glitch occurs
• Front indicator LED for local show
(speed), colour and dim level feedback
Advantages
• Complete functionality solution offering
LED show sequences, colour, dimming
and on/off control
• Can be mounted/used like standard
household dimmer
• Integrated back box and mounting plate
simplify total systemsetup and
installation
|
|
 (View larger image)
Download DimWheel datasheet
Download faceplate datasheet
Download other documentation
Does this product not completely meet your requirements, or is it over-specced? Click here to find out how you can have a standard product adapted to meet your specifications.
|
|
|
eldoLED hereby grants to you, and by using the eldoLED software or by clicking the "I accept" button below, you accept, a non-exclusive, non-transferable limited license to use the eldoLED software only in combination with eldoLED products.
IF YOU DO NOT ACCEPT THESE TERMS, YOU MUST STOP USING, AND DELETE THE ELDOLED SOFTWARE, IMMEDIATELY.
You may not resell, lease or export eldoLED software as such, i.e. without being part of a product system, comprising of eldoLED hardware products and other products. There are no implied licenses.
You understand and agree that eldoLED is the sole and exclusive owner of all right, title and interest worldwide in the eldoLED software. You will not remove, alter, cover or obfuscate any patent or copyright notice or other proprietary or restrictive notice or legend placed or embedded on eldoLED software.
You will refrain from any reverse engineering, disassembly, or any other attempt to obtain eldoLED software in source code or assembly code form. You may not alter or manipulate eldoLED software; you may only use the eldoLED software in its original form.
eldoLED may revoke and terminate your license if you fail to make any payments due to eldoLED or if you breach any provision of this license agreement.
You agree to indemnify eldoLED and to undertake to defend and hold eldoLED harmless from and against any and all claims, demands, causes of action, damages, liabilities, costs and expenses, including reasonable attorneys' fees, arising from your use of the eldoLED software, including, but not limited to, any product liability claims or actions, or the unauthorized use of any trademark, copyright, patent, process or method.
ELDOLED SPECIFICALLY DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT (WHETHER EXPRESS, IMPLIED, OR STATUTORY) REGARDING, RELATING TO, CONNECTED WITH OR ARISING OUT OF ELDOLED SOFTWARE.
IN NO EVENT WILL EITHER PARTY BE LIABLE TO THE OTHER FOR ANY PUNITIVE, EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING LOSS OF PROFITS, LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF DATA OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGIES OR SERVICES OR COST OF COVER) IN CONNECTION WITH OR ARISING OUT OF THIS AGREEMENT, WHETHER ALLEGED AS A BREACH OF CONTRACT OR TORTIOUS CONDUCT, INCLUDING NEGLIGENCE, EVEN IF SUCH PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
ELDOLED'S LIABILITY UNDER THIS LICENSE AGREEMENT OR THE TERMINATION OF THIS AGREEMENT FOR DAMAGES OF ANY KIND, INCLUDING RESTITUTION, WILL NOT, IN ANY EVENT, EXCEED, IN THE AGGREGATE, THE FEES AND PAYMENTS PAID BY YOU, OR € 100, WHICHEVER IS LESS.
You are aware that eldoLED relies on your acceptance and execution of this agreement by choosing the "I agree" option at the bottom of this document and you will not contend the validity of this agreement, and you waive any defenses as to the enforcement of this agreement, based on the form of your acceptance.
This license agreement shall be governed by and construed in accordance with the laws of the Netherlands, without giving effect to the United Nations Convention on the Contracts for the International Sale of Goods. With respect to any disputes arising out of this agreement, the parties hereby submit exclusively to the personal jurisdiction of the courts in 's-Hertogenbosch, the Netherlands. You consent and agree that each such court is a convenient forum for, and has proper venue over, the resolution of all legal actions, proceedings and disputes arising out of or relating to this license agreement. Notwithstanding the foregoing, eldoLED may elect to enforce any of its rights hereunder in the local courts of your country.
|