LM-Dot Pico is a 1-4 channel DMX controlled constant current LED driver with a power output as high as 50W. It has a 350mA-700mA LED current range and offers a 15-bit control resolution. Its remarkably small form factor makes it ideally suited for in-fixture installation.
LM Series
The LM Series products are highly integrated driver/controllers
for high-power LED lighting applications.
The LM Series driver/controllers can be used in a network
or as standalone devices. ShowMaster, supported on all
eldoLED driver/controllers, allows you to upload show sequences
for use in standalone mode. Create and manage your
own show sequences using the TOOLbox and freely available
PC software.
Having multiple LED current sources, the LM Series driver/
controllers cater to the needs of SSL applications demanding
a very high power output. They are DMX- and LedSync-compatible,
allowing 15-bit dimming and colour control and bidirectional
communication for driver configuration and temperature
read-out.
LM-Dot Pico
The LM-Dot Pico is the ideal choice for powering 350mA -
700mA, high-brightness LEDs and is available in a 3- and 4-channel version. Thanks to LedSync Out, the LM-Dot Pico allows
daisy-chaining of SSL fixtures and can broadcast running
show sequences to all connected LM Series devices.
High power output
The LM-Dot Pico allows a power output of up to 50W. Also, the
LED current can be set for each group individually, providing
you with all the flexibility you need to drive your LEDs.
 (View larger image)
|
Example of an LED group wiring schematic
|
|
|
High control resolution
The LM-Dot Pico supports a 15-bit control resolution per output
channel for accurate dimming and fine colour mixing.
Low EMI
Slew-rate controlled dimming and shielded conductors keep
the drivers EMI emissions at a very low level.
Robust thermal management
The LM Series driver/controllers have a robust thermal management.
A built-in over temperature protection shuts down
the driver/controller if it threatens to overheat. Furthermore, an
NTC interface enables various ways of thermal protection, including
LED throttling, a graceful decrease of light output until
normal operating temperatures are reached.
Features
USITT DMX512A- and LedSync-
compatible
Break-through form factor:
68x50x14mm / 2.68x1.97x0.55
Power output of up to 50W
Operating supply voltage range:
24V-32V DC
NTC thermistor interface and
built-in over temperature protection
Advantages
Accurate, smooth dimming and
high-res colour mixing
Drive, control and thermal protection
per fixture
Easy network setup
Low EMI
Screw terminals allowing easy
connection of leads
|
|
(View larger image)
Download datasheet
Download other documentation
FAQs
Does this product not completely meet your requirements, or is it over-specced? Click here to find out how you can have a standard product adapted to meet your specifications.
|
|
(View larger image)